To use the tool, start by attaching the hose to the foot of your carpet cleaner. Make sure the coloured relase clip is facing out, away from the machine.
Once the hose is attached to your carpet cleaner, attach the 2-in-2 Pet Tool to the other end of the hose.
Turn the carpet cleaner on.
Use the slider on the Pet Tool to choose your cleaning mode. Select "Dry Mode" to remove debris, dust and pet hair: the dry suction part is the lower part of the tool, near the dry tub. Use a "raking" motion to clean. The rubber nubs will help attract hair to the suction channel. The hair is collected in a seperate dry tub.
After dry vacuuming, you can use your tool to remove spots, stains and odours from your upholstery by Wet Cleaning. To Wet Clean, make sure your Clean Water Tank contains water and cleaning formula. Move the slider on the tool to "Wet Mode". Then, with the cleaning nozzle in contact with the upholstery, press the spray trigger and pull the tool towards you. It's best to work in small sections until the area is clean.
When you have finished cleaning, turn off the machine, and remove the hose from the carpet cleaner - press on the relase clip to dettach the hose. Then close to hose door.