What to do if your PowerFresh Slim Steam Mop has no steam:
Read More
To use the tool, start by attaching the hose to the foot of your carpet cleaner. Make sure the coloured relase clip is facing out, away from the machine.
Once the hose is attached to your carpet cleaner, attach the 2-in-2 Pet Tool to the other end of the hose.
Turn the carpet cleaner on.
Use the slider on the Pet Tool to choose your cleaning mode. Select "Dry Mode" to remove debris, dust and pet hair: the dry suction part is the lower part of the tool, near the dry tub. Use a "raking" motion to clean. The rubber nubs will help attract hair to the suction channel. The hair is collected in a seperate dry tub.
After dry vacuuming, you can use your tool to remove spots, stains and odours from your upholstery by Wet Cleaning. To Wet Clean, make sure your Clean Water Tank contains water and cleaning formula. Move the slider on the tool to "Wet Mode". Then, with the cleaning nozzle in contact with the upholstery, press the spray trigger and pull the tool towards you. It's best to work in small sections until the area is clean.
When you have finished cleaning, turn off the machine, and remove the hose from the carpet cleaner - press on the relase clip to dettach the hose. Then close to hose door.
Yes, BISSELL Cleaning Formulas are safe for use around children and pets, when used as directed. Please always consult the bottle and the safety instructions before use.
We cannot say exactly, as it depends on how much the trigger is pressed during the cleaning process, but approximately 2-3 average size rooms. When filling the clean water tank with water and formula, there are two measurement lines - one for water and one for formula (some formulas also have a measuring cap), to ensure you are using the correct amount of both. When cleaning large areas that require more than one tank, it is best practice to let the tank empty before refilling with fresh water and formula to ensure the mix is balanced to recommendations.
Our Carpet Cleaning Formulas, including the Wash & Protect, Wash & Refresh and Wash & Remove ranges, can be used in all upright carpet cleaners - even in non-BISSELL machines. The Spot Cleaning formulas are only for use in BISSELL portable/handheld carpet cleaners or Spot Cleaners.