What are you looking for?
Next-day delivery
Next-day delivery
140+ years of experience
140+ years of experience
Up-to 6 Years Warranty
Up-to 6 Years Warranty
Secure payments
Secure payments

My SpinWave has no power/disc pads are not spinning

What to do if your SpinWave discs are not spinning

  • Plug machine into a functioning outlet   
  • Recline machine
  • Press power button to turn on
  • Hold spray button
    • Machine will turn-off automatically when put upright
    • To resume spinning, recline and press power button on
  • Unplug machine
  • Run palm of your hand down the entire cord
    • Cord should be smooth and free of rips and punctures
  • Prongs in plug should be intact with no damage
  • Test the outlet with a cell phone charger or lamp
    • If outlet works with another device, please contact BISSELL Consumer Care
    • If outlet does NOT work, test on a different outlet
  • Test machine in different rooms to avoid exceeding the amp limit on the circuit breaker
  • Put machine upright, unplug and plug back in to reset 
  • Pads will stop spinning from:
    • Pushing down or stepping on the foot
    • Using on carpet or rugs
    • Using without pads on bare floors

If one disc spins and the other does not:

  • A disc may need to be replaced
    • Even though the discs fit snug, the discs are meant to be removed - it is OK to apply force to remove 

If discs are wobbly:

  • Check to make sure rectangular Velcro pads are not raised/out of place
    • If they are, they can be pushed back into place and should lay flat on the disc
    • If you cannot push them back to lay flat, a new disc will need to be ordered 

SpinWave RPM:

Free run - 225 RPM average

With load - 200 RPM average

 

Share this tip